Saturday, 4 January 2014

Inference Engine for Low-Power Real-Time Object Recognition Processor


Inference Engine for Low-Power Real-Time Object Recognition Processor

Abstract.
      Object recognition is computationally intensive and it is challenging to meet 30-f/s real-time processing demands under sub-watt low-power constraints of mobile platforms even for heterogeneous many-core architecture. In this paper, an intelligent inference engine (IIE) is proposed as a hardware con-troller for a many-core processor to satisfy the requirements of low-power real-time object recognition. The IIE exploits learning and inference capabilities of the neurofuzzy system by adopting the versatile adaptive neurofuzzy inference system (VANFIS) with the proposed hardware-oriented learning algorithm. Using the programmable VANFIS, the IIE can configure its hardware topology adaptively for different target classifications. Its archi-tecture contains analog/digital mixed-mode neurofuzzy circuits for updating online parameters to increase attention efficiency of object recognition process. It is implemented in 0.13-µm
CMOS process and achieves 1.2-mW power consumption with 94% average classification accuracy within 1-µs operation delay.
The 0.765-mm2 IIE achieves 76% attention efficiency and reduces power and processing delay of the 50-mm2 image processor by up to 37% and 28%, respectively, when 96% recognition accuracy is achieved.
Index Terms— Mixed-mode processor, neurofuzzy, object recognition, VLSI.
Download Full Report

Wednesday, 1 January 2014

Time Management For Sterilization Of Plants Projects


TIME MANAGEMENT FOR STERILIZATION OF PLANTS Projects

The main aim of the project is to water the plants at different scheduled timings.  The system uses the microcontroller as the most crucial device that manages the time schedule and runs the application at regular programmed timings without the human involvement.

This project provides different on and off timings to provide the water supply to plants. The system starts the water supply only at preprogrammed timings. As the DS1307 Real Time Clock chip with battery back-up is used, there will be no disturbances for the programmed on/off timings even in power failures.

DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. The user may even change the preprogrammed timings and set his timings according to his requirements.

Thus, at the preprogrammed timings, the motor switches on automatically and the water to the plants will be available through sprinklers. LCD is used to display the timings and the status of the motor.

Implementation Of Sleeping Timer For TV And Music System For Power Saving


IMPLEMENTATION OF SLEEPING TIMER FOR TV AND MUSIC SYSTEMS FOR POWER SAVING

In this competitive world human cannot spare his time to perform his daily activities manually without any fail. The most common thing that he forgets to switch off is the television or the music system which he watches during nights and fails to switch it off. With this, even the power will be wasted up to some extent. This project gives the best solution for electrical power wastage. Also the manual operation is completely eliminated. This project provides preprogrammed timings to switch off them automatically after a predefined time. The user can once program these timings according to his requirements and can also change them at any time according to his requirement.                      

            This system switches off the electrical appliances only at preprogrammed timings. As the DS1307 Real Time Clock chip with battery back-up is used, there will be no disturbances for the programmed on/off timings even in power failures.

Three switches are provided for entering the required timings. These switches made this project user friendly. 16X2 LCD display is provided to display the alarm times and current time. DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. The user can even change the preprogrammed timings and set the timings according to his requirements.

Microcontroller Based Electronics Calendar Using RTC And I2C Protocol

MICROCONTROLLER BASED ELECTRONIC CALENDAR USING RTC AND I2C PROTOCOL

This Project Digital Calendar using Microcontroller is an advanced digital calendar, which displays the Date, Day and Month over the LCD display. The system has a battery backup so that it can run over all the time even during the power failure.

LCD is provided to display the day, date, month and year. All the above systems are controlled by the Microcontroller. The microcontroller reads the time value from RTC continuously and displays the time value on LCD display. RTC uses a 3V Lithium battery so that it runs on the battery even in power failures. RTC runs perfectly for almost 1000 years. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.

The DS1307 is a low-power clock/calendar with 56 bytes of battery-backed SRAM. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year.

Smart Medical Refrigerator


SMART MEDICAL REFRIGERATOR

In general, most of the patients forget to take the appropriate medical course at appropriate times. There may be chances that they remember to take the pills at regular times but forget the pill which has to be taken at that particular time. This is a big problem and it is also difficult to doctors to monitor patients always. To avoid these problems, we have implemented this smart medical refrigerator.
               
             By using this project, we can remind the patient to take the medicine at prescribed timings. This smart medical refrigerator alerts the patient if the patient does not take medicines at that particular time and also gives the information about which medicines have to be taken.
           
             In this project we are using a door sensor to identify the door opening and closing by the patient at prescribed timings, 16X2 LCD as display source, it displays the time and medicine name which are have to be taken, a buzzer to alert the patient and near by nurses and doctors. And also we are using one RTC (DS1307) to read the time.

         To control and process all the above modules, a controller is used and the microcontroller preferred in this project is AT89S52.

Time Scheduling For Agricultural Plants


TIME SCHEDULING FOR AGRICULTURAL PLANTS

The main aim of the project is to water the agricultural fields at different scheduled timings.  The system uses the microcontroller as the most crucial device that manages the time schedule and runs the application at regular programmed timings without the human involvement.

This project provides different on and off timings to provide the water supply to the fields. The system starts the water supply only at preprogrammed timings. As the DS1307 Real Time Clock chip with battery back-up is used, there will be no disturbances for the programmed on/off timings even in power failures.

DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. The user may even change the preprogrammed timings and set his timings according to his requirements.

Thus, at the preprogrammed timings, the motor switches on automatically and the water to the field will be available through the motor. LCD is used to display the timings and the status of the motor.

Water Scheduling For Muncipalities


WATER SCHEDULING FOR MUNICIPALITIES

The main aim of the project is to provide the water supply to different localities in a city at different scheduled timings.  The system uses the microcontroller as the most crucial device that manages the time schedule and runs the application at regular programmed timings without the human involvement.

This project provides different on and off timings to provide the water supply to different localities. The system starts the water supply to a particular locality only at preprogrammed timings. As the DS1307 Real Time Clock chip with battery back-up is used, there will be no disturbances for the programmed on/off timings even in power failures.

DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. The user may even change the preprogrammed timings and set his timings according to his requirements.

Thus, at the preprogrammed timings, the person operates the valve to start the water supply from the control room. An audio indication is provided to alert the operator to perform accordingly. LCD is used to display the timings and also display the name of the current locality to which the water supply is provided.

Traffic Controller With RTC


 Traffic Controller With RTC 

The main aim of this project is to operate the traffic lights based on the predefined timings. This system switches on the lights only at preprogrammed timings. As the DS1307 Real Time Clock chip with battery back-up is used, there will be no disturbances for the programmed on/off timings even in power failures.
Three switches are provided for entering the required timings. These switches made this project user friendly. 16X2 LCD display is provided to display the alarm times and current time. DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. The user can even change the preprogrammed timings and set the timings according to his requirements.

SOFTWARE AND HARDWARE TOOLS:
Software Tools:
  1. Keil compiler
  2. Orcad.
Hardware Tools:
  1. Microcontroller AT89S52.
  2. RTC
  3. LCD
  4. ULN driver
  5. Relays and loads

Tuesday, 31 December 2013

Automatic Streetlight Controller With RTC


AUTOMATIC STREET LIGHT CONTROLLER WITH RTC

In this competitive world human cannot spare his time to perform his daily activities manually without any fail. The most important thing he forgets is to switch off the room lights wherever not required. With this, even the power will be wasted up to some extent. This can be seen more effectively in the case of street lights. This project gives the best solution for electrical power wastage. Also the manual operation is completely eliminated. This project provides different on and off timings to operate the lights. The user can once program these timings according to his requirements and these timings will be stored in EEPROM and cannot be erased unless the user wishes to change it again.                     

            This system switches on the lights only at preprogrammed timings. As the DS1307 Real Time Clock chip with battery back-up is used, there will be no disturbances for the programmed on/off timings even in power failures.

Three switches are provided for entering the required timings. These switches made this project user friendly. 16X2 LCD display is provided to display the alarm times and current time. DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. The user can even change the preprogrammed timings and set the timings according to his requirements.

Monday, 30 December 2013

Automatic College Bell Ring System Project


Automatic College Bell Ring System Project

Manual operation of school bell / college bell creates lot of disturbances caused by human errors. If the bell operator forgets to ring the bell for a specific period, or delayed to ring the bell, it creates disturbances for entire the institution. All the classes on that day will be completely disturbed. This problem is more present if the bell operator is on leave. Automatic Periodic College Bell is the only solution to avoid all these problems.

This project is very useful in schools, colleges and educational / academic institutions for automation of periodic class bell. This bell rings only at preprogrammed timings. As the DS1307 Real Time Clock chip is used, entire the calendar can be programmed into the microcontroller. User can program the bell to ring the bell from morning to evening at predefined timings and not to ring in after school hours and on Sundays and Second Saturdays.

Switches are provided for entering the required timings. LCD is provided to display the alarm times and current time. DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures.

External EPROM is used in this project to store the set timings. Data stored remains in the memory even after power failure, as the memory ensures reading of the latest saved settings by the micro controller. It can retain data for more than ten years.

Saturday, 28 December 2013

Wireless Microcontroller Based Transmission Line Cut Identifier


Wireless Microcontroller Based Transmission Line Cut Identifier

Abstract:             

This circuit detects all the voltages and currents from their respective transformers. According to the received voltages and currents, power will be calculated. This method includes receiving data of the measured power consumed by a plurality of power customers, receiving delivered power data that includes data of the power delivered to the plurality of power customers, determining a difference between the receiving data and the maximum power data, determining that the receiving data is greater than a predetermined amount immediately an electrical device will be turned off. If the receiving data is lesser than the predetermined amount then it sends information to the substation that power is not there using the RF Communication.

Friday, 20 December 2013

RF Based House Security System Projects


RF Based House Security System Projects

Security has been a major issue where crime is increasing and everybody wants to take proper measures to prevent intrusion. In addition there was a need to automatic control so that user can take advantage of the technological advancement. So, security today needs to make use of the latest available technological components.
In this project, we are designing two or more transmitters placed at different locations and the Receiver is placed at the location where we need the desired result. An LDR circuit is placed for the day/night sensing. IR sensor is used for detecting the person entry only in the night times with the help of LDR circuit.

             Here in this project transmitter and a receiver modules are designed. Transmitter is placed at location where security is needed and the receiver is placed inside the House. Whenever a person enters in the night time that information is sent to the House where security is needed, through the RF receiver and is displayed through the 16*2 alphanumeric LCD. A buzzer is placed inside the House, which acts like a speaker.
Advanced RF communication is used for signaling. But the important thing to be noted here is that there is no connection between the Transmitter and Receiver section. Radio frequency (RF signal of 434MHz) makes this task very simple.
The programming language used for developing the software to the microcontroller is Embedded/Assembly. The KEIL cross compiler is used to edit, compile and debug this program. Here in our application we are using AT89C51 microcontroller which is Flash Programmable IC.AT represents the Atmel Corporation represents CMOS technology is used for designing the IC.

Robotics Based Projects Ideas | Robotics Based Projects List | Robotics Based Projects Topics


 Robotics Based Projects Ideas | Robotics Based Projects List | Robotics Based Projects Topics

Robotics Based Projects Ideas | Robotics Based Projects List | Robotics Based Projects Topics
List of Robotics Based Projects for engineering student,projects abstract based on robotics.





Following is the Robotics Based Projects list.

  1. Remote Controlled Land Rover.
  2. Mini Robot Car for industrial application
  3. Smoke and LPG Gas detection robot with wireless control.
  4. Automatic sensor based wall painting Robot
  5. PC Controlled Wired Robot.
  6. Automatic Arc Welding Robot
  7. Wireless Voice and image transmission robot for surveillance system.
  8. Remote Controlled Video Analyzing Robot
  9. PC Controlled Wireless Robot.
  10. Remote controlled bomb detecting robot
  11. Speech recognition robot with ultrasonic obstacle avoidance system.
  12. Sensor Operated Automatic Punching Aero plane Controlling System (Flying Model)
  13. Obstacle detection Robot with Ultrasonic Sensors.
  14. SMS controlled pick and place robot
  15. Wall Follower Robot.
  16. Digital Compass and GPS based self navigating Robot.
  17. Man less defense
  18. Robot Controlled Wireless Audio-Video Streaming Camera.
  19. Cell phone controlled Solar Vehicle
  20. speech controlled wireless elevator system.

Pneumatic and Hydraulic Based Projects


 Pneumatic and Hydraulic Based Projects

Pneumatic and Hydraulic Based Projects
 Download Pneumatic and Hydraulic Based Projects list,abstracts,Synopsis of Pneumatic and Hydraulic Based Projects etc







Following is Pneumatic and Hydraulic Based Projects list

  1. Electronic Assisted hydraulic breaking system
  2. Fabrication of Pneumatic Auto feed Metal Forming Machine
  3. Fabrication of Pneumatic Auto feed Bottle washing Machine
  4. Fabrication of Paper Cup Making Machine
  5. Fabrication of Abrasive Jet Machine
  6. Automatic Pick and Place paint spraying Equipment
  7. Combined hydraulic and disk break system
  8. Fabrication of Pneumatic Mobile Crane
  9. Automatic paint spraying Equipment
  10. Fabrication of Pneumatic double axis Pick and Place Robot
  11. Automatic pneumatic vice and jack
  12. Fabrication of Hydraulic Puller for Automobile
  13. Fabrication of Pneumatic automatic Vegetable Cutting Machine
  14. D & F of Hydro-Pneumatic Vice with Pressure Booster
  15. Fabrication of Pneumatic punch die
  16. Fabrication of Pneumatic Automatic sheet Cutting Machine
  17. Automatic pneumatic welding machine

Wednesday, 18 December 2013

Insurance Policy Management System Project



Insurance Policy Management System Project

INTRODUCTION:    
         The project entitled INSURANCE  MANAGEMENT  is a pilot project for small insurance company to manage their administration .

PROJECT: 
        INSURANCE  MANAGEMENT  is a software application maintain the records related to Insurance Products.  

OBJECTIVE:
       The main objective of the application is to automate the existing system of manually maintaining the records agents, policies, premium, maturity, etc.,  

SCOPE:
       This application can be used by any Insurance company to maintain the Insurance management, daily transactions, policy registration etc.

HR Management System Project



 HR Management System Project

Introduction
HR Management software is prepared for leading company. This company is recruiting people every month. To match the resumes they required the software.

Purpose
The purpose of this document is to specify requirements and to give guidelines for the development of above said project. In particular it gives guidelines on how to prepare the above said project.
This document is intended to be a practical guide for people who developing this software.

Scope
This software is very general purpose software. On completion of this software will be useful for many companies

Goal
The main goal of the application is to maintain the records of  resumes, This software is helpful to segregate the resumes based on the jobs.

Overview
This software save lot of time compare to the manual searching of resumes.  This provide complete cycle of the recruiting.

Existing System
At present all HR work is managing manually. Each time job opening thousands application will be coming, processing them is very tidious job. Also matching with the particular job also very difficult. Preserving all the resumes for long time is again one more tuff job.

Proposed System
In the proposed system the software will be developed all the resumes can feed into it. Later searching and matching will be very easier, even there thousand of resumes searching will not take much time. Also all the information is available in one place. Each resume can match for different jobs. No need call advertisement each time. With the existing resume only we can search for the suitable candidate.


Hardware Requirements

Processor                   :       Pentium IV 2GHz and Above
RAM                          :       2GB RAM
Monitor                      :       15” Color Monitor
Keyboard
Mouse

Software Requirements

Operating System.       :       Windows XP
Developing Tool          :       Visual Basic 6.0
Database                   :       MS Access

Hotel Cash Counter Billing System Project


Hotel Cash Counter Billing System Project

Introduction
Hotel Cash Counter Billing software is general software developed for Hotels. This software help them to do billing and take the reports

Purpose
The purpose of this document is to specify requirements and to give guidelines for the development of above said project. In particular it gives guidelines on how to prepare the above said project. This document is intended to be a practical guide for people who developing this software.

Scope
As this is generic software it can be used by a wide variety of outlets (Retailers and Wholesalers) to automate the process of manually maintaining the records related to the subject of maintaining the daily billing.

Goal
The main goal of the application is to maintain daily billing and to take the daily report.

Bakery Billing And Stock Management System Project


 Bakery Billing And Stock Management System Project

Introduction
Bakery Billing and Stock Management software is general software developed for Bakery and Condiment Center. This software help them to do billing and stock maintenance.

Purpose
The purpose of this document is to specify requirements and to give guidelines for the development of above said project. In particular it gives guidelines on how to prepare the above said project. This document is intended to be a practical guide for people who developing this software.

Scope
As this is generic software it can be used by a wide variety of outlets (Retailers and Wholesalers) to automate the process of manually maintaining the records related to the subject of maintaining the stock and cash flows.

Goal
The main goal of the application is to maintain the records of purchase, Sales and stock details with cash transaction maintenance.

Excel Sheet Valuation System Projects


Excel Sheet Valuation System Projects

Introduction
In the regular examination students writes the answer on paper, later teacher will valuates the answer sheet. Every year this is routine work for the teacher to make valuation, because of so many factors every year teachers makes strike or boycott the valuation as result the valuation will not complete in in time. Student have to face many problems. Here we proposed a system where an excel file will be sent to the student system, student as to answer  the excel sheet once the answering complete he send back the file to server. Then server automatically makes valuation. So no need of teacher to make valuation.

Purpose
The purpose of this document is to specify requirements and to give guidelines for the development of above said project. In particular it gives guidelines on how to prepare the above said project.
This document is intended to be a practical guide for people who developing this software.

Scope
This project have a very good scope because valuation is take place in the server, no manual valuation is needed. If we improve the system step by step then one day no teacher is required to make the valuation.

Goal
The main goal of the software is automatic valuation system.

File Tracking System .NET Projects


 File Tracking System .NET Projects 

This project is developed for Medical Transcription Company to manage Files. This program automatically sends the files to the MT’s and Proffers once they login to the system. Once they complete the work they can send back the files to the server. System automatically store all the file related information like.
          The file transcribed by the user.
          Date of the transcription
          File belongs to which hospital
          Line count of the file
          Keeping the file in the particular directory etc.,

This software consists of Two programs.
Server Program
o   User Creation
o   Agency Creation
o   Hospital Creation
o   New File Upload form
o   File Attributes Form
o   File Tracking Main Form
o   User Report Form
o   File Report Form
Client Program
o   User Login
o   User Screen
o   User Report