Wednesday, 1 January 2014

Implementation Of Sleeping Timer For TV And Music System For Power Saving


IMPLEMENTATION OF SLEEPING TIMER FOR TV AND MUSIC SYSTEMS FOR POWER SAVING

In this competitive world human cannot spare his time to perform his daily activities manually without any fail. The most common thing that he forgets to switch off is the television or the music system which he watches during nights and fails to switch it off. With this, even the power will be wasted up to some extent. This project gives the best solution for electrical power wastage. Also the manual operation is completely eliminated. This project provides preprogrammed timings to switch off them automatically after a predefined time. The user can once program these timings according to his requirements and can also change them at any time according to his requirement.                      

            This system switches off the electrical appliances only at preprogrammed timings. As the DS1307 Real Time Clock chip with battery back-up is used, there will be no disturbances for the programmed on/off timings even in power failures.

Three switches are provided for entering the required timings. These switches made this project user friendly. 16X2 LCD display is provided to display the alarm times and current time. DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. The user can even change the preprogrammed timings and set the timings according to his requirements.

Microcontroller Based Electronics Calendar Using RTC And I2C Protocol

MICROCONTROLLER BASED ELECTRONIC CALENDAR USING RTC AND I2C PROTOCOL

This Project Digital Calendar using Microcontroller is an advanced digital calendar, which displays the Date, Day and Month over the LCD display. The system has a battery backup so that it can run over all the time even during the power failure.

LCD is provided to display the day, date, month and year. All the above systems are controlled by the Microcontroller. The microcontroller reads the time value from RTC continuously and displays the time value on LCD display. RTC uses a 3V Lithium battery so that it runs on the battery even in power failures. RTC runs perfectly for almost 1000 years. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.

The DS1307 is a low-power clock/calendar with 56 bytes of battery-backed SRAM. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year.